Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #4454
    RowingBoatmanSteve
    Participant

    To fill the moments between setting epoxy, and to alleviate the monotony of sanding, I turned my attention towards modifying a second hand boat trailer to suit the teardrop.

    #4455
    RowingBoatmanSteve
    Participant

    To protect against corrosion, I sprayed a topcoat of black Raptor bed liner after finishing the welding.

    #4456
    RowingBoatmanSteve
    Participant

    I fabricated a couple of brackets to support the Timbren independent suspension…

    #4457
    RowingBoatmanSteve
    Participant

    Suspension bolted in place with addition of cross brace for extra stiffness (trailer inverted) …

    #4458
    RowingBoatmanSteve
    Participant

    … with the added benefit of providing space for a fresh water tank between the wheels!

    #4459
    RowingBoatmanSteve
    Participant

    …and the ICC module added to the equation.

    #4460
    RowingBoatmanSteve
    Participant

    I felt curved mudguards would complement the shape of the teardrop, and I chose to powder coat them in black to match the steelwork and to visually separate the trailer from the camper.

    #4461
    RowingBoatmanSteve
    Participant

    (… the cleanest they will ever be!)

    #4462
    RowingBoatmanSteve
    Participant

    … and fitted to the trailer.

Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.