Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #3537
    keaner21
    Participant

    Hi all,

    I’m building from plans and am putting together the base. I’m finding, according to my drawings, that it is not square. From the centre line where the 2 sides join to the outside edges is a full inch out of square.

    Is this a feature or are my drawings out?

    Thanks

    #3559
    jmb_builds
    Participant

    Hi, are we looking at the short front side of the panel? At the front the angle is smaller than 90Β° so this does not necessarily look wrong to me. BR; Johannes

    #3560
    keaner21
    Participant

    Hi Johannes.. you’re correct I didnt notice it on the plans and have since made corrections.

    Thanks

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.