This topic contains 3 replies, has 4 voices, and was last updated by  Tom B Texas 5 months, 4 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #2339

    RCRICH
    Participant

    Did you guys grind out part of the filet or sand down the shelf to fit in the camper?

    #2342

    mpilone
    Participant

    I believe I rounded the back corner of the shelf. If I remember correctly (it’s been a while), you fillet the shelf once it is in place so you can fill/cover the rounded corner later.

    -mike

    #2346

    smithn00
    Participant

    I sanded the shelf.  It gets it’s own filets.

    #2347

    Tom B Texas
    Participant

    Take extra care when “filleting” as sanding in that tight space is a challenge. And this is quite visible once finished. Good Luck!

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.