Tagged: 

This topic contains 2 replies, has 2 voices, and was last updated by  rovineye 1 month ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1319

    rovineye
    Participant

    Of those that have mounted or seen lights in the galley or on the galley hatch, what worked or didn’t work well? I have a short LED strip and two pucks. Thinking of the strip on the hatch about mid way back, but no plan for the pucks.

    Cheers

    #1330

    ArtisticAdam
    Participant

    I’ve done some 3D mock-ups (see image below) and plan to install two 12v 3″ LED pucks with 120 degree beam angle on the galley hatch on the left and right beveled surfaces midway, near the tapered ends of the hatch stiffener. This position seems to be the best for directing light into the galley space when the hatch is open.

    You could power up your puck light and or light strip and hold it in place to find your ideal location. Keep in mind to avoid interfering with the galley seal & gutter as well as the galley module if you have one.

    Custom Galley - Light Placement

     

    #1331

    rovineye
    Participant

    That was about where I was thinking of putting the strip, horizontally. I will try both and see which works best. I am mounting them with VHB tape, so not too difficult to reposition if I change my mind.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.