Welcome to TeardropForum.com Forums Teardrop Builders’ Forum Attaching galley to camper help needed

This topic contains 1 reply, has 2 voices, and was last updated by  western_flyer 2 months, 3 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #2502

    RCRICH
    Participant

    Im trying to attach the galley and the one inch bolts dont seem long enough too pass thru the galley and cabinets. Did you guys have too replace them with longer hardware?  And the screws supplied to attach the cabinet to the wall or bulkhead seem way too long like they would pierce the other side. Any one have the same issues?

     

    #2517

    western_flyer
    Participant

    The 1 inch screws were too short for me also. I used 1 1/2 inch brass screws and used a hacksaw to trimmed them to the right length.  I used brass here and in some other areas because it is easy to cut to size and more than strong enough for many situations on the TD. Brass, while not totally corrosion proof, will not rust. The bulkhead screws pass into to the cabin shelf so there is no problem with the length of these.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.