Forum Replies Created
-
AuthorPosts
-
Helibuff
ParticipantHelibuff
Participanthere it is with the paint
Helibuff
Participantthe idea did not come from me , I got it from mpilone . Havwe a look were I got the idea
it,s on page 2
-
This reply was modified 5 years, 11 months ago by
Helibuff.
Helibuff
ParticipantTry some Velcro 😀
Helibuff
ParticipantYes it helps a lot ,
thank you Andrew
Helibuff
ParticipantYep I add the same problem on mine with one handle in the middle
I solved the problem by installing two handdles and added a brake light to hide the hole of the old handdle
-
This reply was modified 6 years ago by
Helibuff.
Helibuff
ParticipantHi that is so cool, I think I will do the same thing to mine. Could you give me the size of your opening and the size of the inside of your storage box.
Thank you in advance
Regards
Helibuff
ParticipantHi guy’s
I am still at it , here is a picture of it , I am going to paint the sides
Helibuff
ParticipantHi Guy’s not much was done on the tear drop last month, I was in vacation with my wife.
Since I am back I did a coupe of steps.
I did the side of it and tape the joints
And also stich the bulkhead in and tac glued the stifener
-
This reply was modified 7 years, 6 months ago by
Helibuff.
Helibuff
ParticipantA bit more work done this week. panel 1 and 2 glued together with filer and tape.
And I just finish the stiching of the panel 3 and 4
Helibuff
ParticipantOK More Epoxy done this afternoon on the inside.
<img src="<img src="https://farm5.staticflickr.com/4702/28268086979_ab5dc7aca5_z.jpg" width="480" height="640" alt="19" />//embedr.flickr.com/assets/client-code.js” alt=”” />https://drive.google.com/file/d/1c-XZuRW-3c-XzlN2t5VnS_KuBZGASS-q/view?usp=sharing
https://drive.google.com/file/d/1-M3CDy8qSNYvTGBPZ3iEYdTmQ5sKQ1-k/view?usp=sharing
Helibuff
ParticipantWow That is cool ! Great idea
Helibuff
ParticipantOne more step done , because i deceided to strip the ceilling with Cedar, I need to cover the it with 2 tickness of 6 oz cloth with epoxy.The following picture shows one part of it done, I need to do it by step because It was tack with staple.
https://drive.google.com/file/d/1q6tb5wFL7960488xADZSmBQJGZgOo66K/view?usp=sharing
Helibuff
ParticipantLast weekend I did the Scarft on pannels #2 , glued with epoxy, over the plan for alignement, 24 hours drying time.
https://drive.google.com/file/d/1g4zGl5pZ8emc_9mLh_67gy72L2QiJ-O-/view?usp=sharing
This morning I stitch it with the center panel #1 (roof)
https://drive.google.com/file/d/1P7a0_d7AjkHSERGi0sd_ZKVEQXR5wQYs/view?usp=sharing
Next step is to put marking on the roof for the bulkhead and hatch stiffener, and the top hatch.
Helibuff
ParticipantOk One more time, Try this link and let me know if you have access.
https://drive.google.com/file/d/19vit4PDwOyCU62zqsVcsgdzehpAd-per/view?usp=sharing
https://drive.google.com/file/d/1r4j4QiVgacE6z0MEUEnk7nA4Ra74UEfJ/view?usp=sharing
-
This reply was modified 5 years, 11 months ago by
-
AuthorPosts