Galley Flat – Glass it in? Welcome to TeardropForum.com › Forums › Teardrop Builders’ Forum › Galley Flat – Glass it in? Tagged: Fiberglass galley interior This topic has 3 replies, 3 voices, and was last updated 4 years, 11 months ago by turtle2019. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts December 29, 2019 at 4:05 pm #2828 turtle2019Participant Doing a new build, but can’t seem to find in the manual whether to add fiberglass to the top (outside) of the installed galley flat, and/or the outside (galley area) of the bulkhead. Should they be glassed, or simply epoxied? December 29, 2019 at 11:47 pm #2830 rovineyeParticipant No glass. But to prevent galley flat separation I would add glass tape where the bulkhead meets the galley flat, both inside and in the galley. January 3, 2020 at 12:54 am #2838 western_flyerParticipant I taped all edges of the galley flat – top and bottom, including the bulkhead/flat on both the cabin and galley sides. January 9, 2020 at 11:52 am #2846 turtle2019Participant Thanks guys! Taped all joints both inside and galley. Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In