The CLC Teardrop Camper Builders’ Forum

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 18 total)

1 2 →

Author

Posts
March 6, 2019 at 10:46 pm in reply to: High Speed Tires #2442

RCRICH
Participant

Is the tire the only issue or is it the hub and bearings that cant take the high speed. I need to get a trailer soon and the trailex is alot of money.

February 19, 2019 at 10:31 pm in reply to: The bottom confusion! #2430

RCRICH
Participant

Does the rustoleum truck liner go directly on the epoxy or do you prime it?

January 12, 2019 at 8:49 pm in reply to: I need some help with door sills #2397
RCRICH
Participant
- This reply was modified 6 years, 9 months ago by RCRICH.
January 12, 2019 at 8:48 pm in reply to: I need some help with door sills #2396

RCRICH
Participant

January 12, 2019 at 8:47 pm in reply to: I need some help with door sills #2395

RCRICH
Participant

December 21, 2018 at 10:45 pm in reply to: Anyone stitch the hatch down? #2353

RCRICH
Participant

December 21, 2018 at 10:42 pm in reply to: Anyone stitch the hatch down? #2352

RCRICH
Participant

On my kit i have holes in the hatch that line up with the top of the camper.

I might have to use them as it seems the hole in the camper is cut perfect but it seems a little large.

December 19, 2018 at 8:20 pm in reply to: Anyone stitch the hatch down? #2341

RCRICH
Participant

The top of the camper and the hatch have holes for stiches but the manual says nothing about using them. Did you guys use them?

Thanks

December 15, 2018 at 12:03 am in reply to: Lights #2329

RCRICH
Participant

Very nice work

December 10, 2018 at 11:24 pm in reply to: Question about the doors #2321

RCRICH
Participant

Any updates on fiberglassing the inside of the doors?

November 17, 2018 at 3:36 pm in reply to: Hatch question #2287

RCRICH
Participant

Great thanks for the info

November 16, 2018 at 6:38 pm in reply to: Hatch question #2285

RCRICH
Participant

November 6, 2018 at 10:37 pm in reply to: Rear panels alignment problem. #2264

RCRICH
Participant

November 6, 2018 at 10:30 pm in reply to: Rear panels alignment problem. #2263

RCRICH
Participant

Can you remove a filet with heat?

November 6, 2018 at 10:29 pm in reply to: Rear panels alignment problem. #2262

RCRICH
Participant

Im having this same exact problem with mine now.

It seems that the mold does not hold panel 3 in the correct shape for the lid and quarter panels to meet up right.

I was told to move on but now i think i should try to remove the galley flat and try to heat the panels and cinch them together.

Uggggggh
Author

Posts

Viewing 15 posts - 1 through 15 (of 18 total)

1 2 →