Custom Drawers for Galley Welcome to TeardropForum.com › Forums › Teardrop Builders’ Forum › Custom Drawers for Galley This topic has 7 replies, 2 voices, and was last updated 11 months, 4 weeks ago by RowingBoatmanSteve. Viewing 8 posts - 1 through 8 (of 8 total) Author Posts November 11, 2023 at 4:05 am #21599282 RowingBoatmanSteveParticipant A couple of custom drawers added to the galley helps contain cutlery and cooking utensils… November 11, 2023 at 4:08 am #21599301 RowingBoatmanSteveParticipant Ply for the drawer faces was sourced from the cut-outs from the front panel to ensure matching grain… November 11, 2023 at 4:11 am #21599313 RowingBoatmanSteveParticipant A light ply carcass was constructed, to which the drawer fronts were attached… November 11, 2023 at 4:33 am #21599356 RowingBoatmanSteveParticipant A base board with ply back-stop and alloy angle drawer guides was then made and attached to the galley… November 11, 2023 at 4:37 am #21599366 RowingBoatmanSteveParticipant The cutout corners were squared to match the profile of the new drawers… November 11, 2023 at 4:59 am #21599441 RowingBoatmanSteveParticipant By sizing the drawer fronts larger than the cutout, clearance gaps are covered, and the radiused theme is maintained across the galley face. November 11, 2023 at 9:24 am #21600351 KirtParticipant Great job! November 15, 2023 at 6:42 pm #21615096 RowingBoatmanSteveParticipant Thanks Kirt – it’s been inspiring to see the range of customised designs in the picture galleries over time… Author Posts Viewing 8 posts - 1 through 8 (of 8 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In