wayne3676

wayne36762016-11-22T14:51:04-04:00

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
January 10, 2021 at 12:16 pm in reply to: Flush issues #3342

wayne3676
Participant

drilled new holes in the mold to make it line up

September 11, 2020 at 10:04 pm in reply to: Cork headliner? #3199

wayne3676
Participant

what adhesive did you use? looks great

August 24, 2020 at 9:52 pm in reply to: Painting the bottom while I have the shell upside down for its fiberglassing #3181

wayne3676
Participant

that’s when I did it.

April 1, 2020 at 9:08 pm in reply to: Fitting doors before glassing the bottom? #2965

wayne3676
Participant

that’s what I’m going to do. as soon as the doors are cut out I think the stiffeners on the doors and braces around the doors should be install right after they are cut out.

October 11, 2019 at 8:41 pm in reply to: Surface prep of panels #2783

wayne3676
Participant

I had the same problem with my panels. I filled it with unthickened epoxy and put heavy plastic drop cloth over it let it cure removed plastic and sand. under the glass it hide the flaws well.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)