Daniel

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 43 total)
1 2 3
  • Author
    Posts
  • August 22, 2021 at 12:48 pm in reply to: water leak around doors #3809
    Daniel
    Participant

    I have the same issue, and I am tempted to try this.

    August 15, 2021 at 4:13 pm in reply to: Camper meeting in the NE #3800
    Daniel
    Participant

    Wayne, got reservations?

    Today the camp was fully booked. I do not have reservations?

    August 15, 2021 at 4:11 pm in reply to: Slideout table possibility #3799
    Daniel
    Participant

    Here is my take on this idea http://teardropforum.com/forums/topic/slideout-table-possibility-2/

     

    August 7, 2021 at 10:34 pm in reply to: Has anybody installed a MaxxFan Deluxe? #3779
    Daniel
    Participant

    Interested in this, have you installed it?

    July 26, 2021 at 7:46 am in reply to: Camper meeting in the NE #3762
    Daniel
    Participant

    Nice,

    How about we split the distance, and meet at Black Moshannon State Park?

    July 25, 2021 at 8:59 pm in reply to: Camper meeting in the NE #3760
    Daniel
    Participant

    I could do an extended weekend from 20 to 23 of August.

    July 16, 2021 at 7:37 am in reply to: Camper meeting in the NE #3744
    Daniel
    Participant

    Wayne

    Yes, plenty of nice camping spots around here in the national forest.

    July 6, 2021 at 7:45 am in reply to: Lantern hook #3727
    Daniel
    Participant

    1. The roof hatch/vent reinforcement bezel is thick enough to support the weight of a regular camping lanter.

    2. I suggest to install the electric system now, during construction, because it is easier than to retrofit.

    3. For my build, I installed my own electric system (not the CLC kit) under the liner, and all in all, my camper cost under $4k

    July 3, 2021 at 8:04 am in reply to: What Would You Do Different? #3717
    Daniel
    Participant

    JB,

    The document you share is locked, I cannot access its content.

    Would you please copy and paste its content here, to make it easy to read.

    Thanks,

    June 27, 2021 at 9:41 pm in reply to: ? Sanding wire stitches prepping for fiberglass ? #3692
    Daniel
    Participant

    If you have a pair of fine-tipped diagonal cutter, or a pair of nail clippers, trim the wires flush with the wood. This way you avoit tears and rips in the sandpaper. A file might be too aggressive.

     

    June 25, 2021 at 8:23 am in reply to: Camper meeting in the NE #3682
    Daniel
    Participant

    Wayne,

    So far, there has been little interest in the meeting, with only one person potentially attending the weekend of July 17th.

    At this point it seems that the meeting will not take place, at least not on the 17th.

    June 22, 2021 at 12:29 pm in reply to: quarter panels and how they are attatched. need clarification. #3673
    Daniel
    Participant

    The quarter panels lay on the galley flat, they shouldn’t be stitched/glued to the hatch.

     

    June 11, 2021 at 7:31 am in reply to: Camper meeting in the NE #3649
    Daniel
    Participant

    Hey,

    Thanks for the interest in this proposed meeting.

    I am thinking of two possible dates: the weekend of July 10th, or the following weekend July 17th.

    Would one of these dates work better for you?

    June 4, 2021 at 7:04 am in reply to: Camper meeting in the NE #3630
    Daniel
    Participant

    I am not familiar with the number system you reference 🙁

    I am also in PA, in McKean county. Where about are you?

    June 2, 2021 at 7:00 am in reply to: Hatch Sides Bowing Outwards #3624
    Daniel
    Participant

    I have not tried the leak test before the clasps because it was obvious that it will leak.

    Here is what I used

     

  • Author
    Posts
Viewing 15 posts - 16 through 30 (of 43 total)
1 2 3